Privacy Policy
1. Intro
The proper handling of personal information is extremely important to us.
We therefore take great care when processing and protecting your personal information. This is done in accordance with the terms and conditions of the Data Protection Act.
To ensure your privacy as far as possible, we adhere to the following core values:
-
Information: We wish to inform you about why and how we process personal information. This is described in our privacy statement
-
Limited collection: We take great care to limit the information we collect to only that which is necessary for our services
-
No personal marketing: We will never share your personal information for marketing purposes. Never
-
Right of access and correction: We respect your right to access, correct, or delete your personal information.
This privacy and cookie statement describes how we implement these core values and how we respect and protect your right to privacy. We strongly urge you to read this statement carefully.
2. Use of personal information
We only store and use personal information that has been directly provided by you.
3. Purposes of data processing
The personal information we collect is exclusively used for the following purposes:
-
to process your order
-
to meet our legal obligations
-
to inform you about our developments
4. Types of personal information
We can process the following personal information you provide:
-
name
-
address
-
date of birth
-
e-mail address
-
phone number
-
VATnumber
5. Third Parties
We will not share your personal information with third parties at all.
This configuration fits any 1/32 scale Hawker Hunter. Navigation lights are plain lights and Beacons are flashing asynchronously.
Depending of the version chosen, the configuration contains :
- 1 x HighTech UV Glue
- Electro-luminescent identification stripes (Glow in dark stickers)
- 2 x Nano Leds for front end Wings navigation lights (Port = Red, Starboard = Green, Plain lights)
- 2 x Nano Leds for Tail navigation light (White Plain light)
- 2 x Nano Leds for Upper and Lower fuselage Beacons (Orange Flashing)
- 1 x 10mm Flickering Led for Exhaust
- 2 x Nano Leds for Cockpit Panels
- Battery holder for 4 x AA batteries 1.5v with switch on/off (Cable lenght from battery to circuit board is 40 cms - Please, leave a message if you need longer)
Swiss Version (MK58) - Additional lights
- 2 x Nano Leds for front fuselage position lights (White Plain light)
- 2 x Nano Leds for back edge fuselage position lights (White Plain light)
- 1 x Nano Led for Landing light
The kit is of course Plug & Play ...
It is proposed in 2 different configurations.
1) Airplane on Taxi Way Checklist
2) Airplane Taking off, Landing of Flying mode
1) Airplane on Taxi Way Checklist
Reproduction in sequence of the operations performed by the crew from boarding to take-off
1) Cockpit lights and console switchs on
2) Navigation lights on - Cockpit lights off
3) Exhaust on
4) Landing light on (Swiss only)
5) Anti-collision On
2 minutes All on
Shutdown in the reverse sequence
30 seconds All off
Start of a new cycle
2) Airplane Taking off, Landing of Flying mode
Reproduction of the airplane taking of or landing. Take care as the configuration of the flaps may be different.
No cycle. All lights on and no shutdown.
1) Cockpit lights off and console switchs on
2) Navigation lights on - Plain light
3) Exhaust on
4) Landing lights on (Swiss mk 58 only)
- Not to be shown in flight mode as Landing gears are retracted
5) Anti-collision On - Flashing
