F18 Hornet - Lights set - 1/32

This Lights set fits any 1/32 scale F18 Hornet and reproduces the full navigation light system, by proposing 2 different configurations.

1) Airplane on Taxi Way

2) Airplane Taking off, Landing of Flying mode

The components are identical but the program is different. See full details hereafter ...

Every configuration contains :

- 1 x HighTech UV Glue

- 2 x Nano Leds for Air intakes navigation lights

- 2 x Nano Leds for Upper Wing navigation lights

- 2 x Nano Leds for Under Wing navigation lights

- 1 x Nano Leds for Tail Identification light

- 2 x Nano Led for Tail Beacons

- 1 x 10mm Flickering Led for Exhaust

- 1 x Nano Led for Landing lights

- 2 or 4 x Nano Leds for Cockpit Panels

- Luminescent Air formation lights (sticker)

The kit is of course Plug & Play and feed by a Battery holder of 4 x 1.5v Standard Alcaline

= = = = = = = = = = = = =

Identify your preferred light configuration :

1) Airplane on Taxi Way Checklist

Reproduction in sequence of the operations performed by the crew from boarding to take-off

1) Cockpit lights and console switchs on

2) Navigation lights on - Cockpit lights off

3) Exhaust on

4) Landing and Taxi lights on

5) Anti-collision On

2 minutes All on

Shutdown in the reverse sequence

30 seconds All off

Start of a new cycle

2) Airplane Taking off, Landing of Flying mode

Reproduction of the airplane taking of or landing. Take care as the configuration of the flaps may be different.

No cycle. All lights on and no shutdown.

1) Cockpit lights off and console switchs on

2) Navigation lights on - Fading in / Fading out

3) Exhaust on

4) Landing lights on

- Not to be shown in flight mode as Landing gears are retracted

- OCU version ; on Main landing gears only - from MLU version ; on nose wheel only

5) Anti-collision On - Flashing